I regret to inform you that “Feathergate 2011” has now been renamed “Feathergate 2011/2012.”
Only 1 victim has been identified.
More details to follow.
Andrew's RV-7 Build Log
Turning a pile of aluminum into a flying machine one rivet at a time.
Totals
403.5 total build hours
6148 rivets set
643 rivets drilled out
9 parts reordered
1 figure-8 dimple
(as of Oct 15, 2018)
-
Recent Posts
Pages
Links
Tags…
aileron Avery Backriveting C-frame cleco clecoed Clecos Construction Manual countersink Countersinking countersunk Deburr Deburring Devinyl dimple dimpled Dimpling drill drill bit Drilled Drilling Drill out edge finishing edges Elevator Empennage flange flap fluting Front spar Ginger girlfriend HS Jack Leading edge left elevator Match-drilling matchdrilling MDF Nutplate Nutplates order Plans Practice Kit prep prime primer Priming proseal Rear spar Rib Ribs Rivet Riveting rivets RTV Rudder Scotchbrite scuff shoot skeleton skin skins spar Squeeze Stiffener Stiffeners tank Tools Van's Vinyl VS Wing Wings WorkbenchBuild Log Stats
- 553,486 hits since August 2009
Progress Charts
Search
-
Join 51 other subscribers
Reminders
1) Fix rivets in right elevator
2) Trim right elevator weight
3) Clean up HS cuts
4) Look for underdriven rivets
5) REBUILD RUDDER :-(
6) Finish riveting right rear spar
7) Replace rivet on inboard rear spar edge
8) Start on left wing
9) FB tips on emp
10) WingtipsMe!
-
Andrew's RV-7 Build Log 