Well, not much tonight, except a complete lack of motivation. I move the right upper inboard wing skin over to the left wing (just to hang there) while I started deburring and dimpling the right wing ribs.
I decided to only deburr and dimple the upper side of the ribs. I’m going to leave the lower side as-is so I can 50% cleco the lower skin (when able) to the skeleton while riveting the upper skin in place.
Action shot of me dimpling the ribs.
I was planning to be out in the garage for an hour and a half, but my boredom got the best of me and I quit after a (hot) half hour.
I told you it wasn’t exciting.
Andrew's RV-7 Build Log 