Well, not much today, but I got all the right tanks ribs edge finished and then made sure to run the leading edges of each of the ribs over the scotchbrite wheel to remove any lumpy areas (so as not to create any bulges in the tank skin when the ribs are clecoed in).
Then, in the morning, I brought the right lower inboard skin in the kitchen and started the deburring dance.
One of eight skins done.
Then, later at night, I brought in the right lower outboard skin.
I went ahead and scuffed the interior side of the skin while I was at it.
So, some tedious work today, but work nonetheless.
0.5 on the tanks, and 1.0 on the wings.
Andrew's RV-7 Build Log 